New turnings
-
Bubinga box
This Bubinga box is 9cm tall and 7.5cm in diameter. Once I had finished turning it I put it on my Rose Engine lathe and decorated the top of the lid and the inside of the lid. This box is the first piece that I have embellished on the Rose Engine and I need to do some more practice. However, it has been given to Jeff who helped me make the Rose Engine.
Bubinga box 
Bubinga box lid 
Bubinga box lid inside -
Laser engraving
I have recently built a Rose Engine lathe as detailed in this page and one of the options that I built into it was the ability to use the laser engraving attachment from my 3D printer. I mounted the laser on the bracket that normally holds the Dremel cutter with the magnets that come with the laser attachment.
Laser mount I cut a small piece of end grain Sycamore and mounted this on the rose engine. Using one of the rosettes I burnt this pattern into the wood. The centre flower is burnt with the laser one side of centre along with the next outer shape. The outer two shapes were burnt using the laser the other side of centre.
Burnt pattern -
Some more gnomes
These gnomes are quick and fun to make. The first has a spalted beech body padauk hat and ebony nose. The second has a cherry body, acacia natural edge hat and a walnut nose. The first is currently available the second is sold.
-
Three gnomes
These gnomes are made in various woods and stand about 11cm high. These all went to my family but I do have others in stock should anyone want some.
Wooden gnomes -
Stained Beech octagonal bowl
This is a 20cm in diameter octagonal beech bowl that is about 3mm in thickness. The inside of the bowl is stained with blue spirit stain. It is finished with satin acrylic lacquer. It was intended to be a square bowl when I started but a design opportunity arose when one of the wings was too thin and so I cut the four corners off and turned it into an unequal octagon.
Octagonal stained beech bowl -
Oak heart dish
This is a shallow oak dish 20cm by 20cm and it is coloured with red spirit stain and finished with wax. Made as a present for my wife for Valentines day next month. -
Christmas tree
This Christmas tree stands about 30cm tall with a base made from Bubinga. Mounted in the base is a small battery pack used to power the LED lights in the opaque plastic tree. The tree is made on a 3D printer and is 1mm thick, it replaces the original opaque glass tree that broke whist I was fixing it to the base.
-
Sea urchin shell ornament
This is one of several sea urchin shell ornaments that I have made. The shells are 4-5cm in diameter and I have used various woods for the finials. This example is in Olive.
-
Carob oblong natural edge bowl
This natural edged bowl is made from a piece of Carob, unfortunately a lot of the colour was lost in the turning. It is 21cm by 14cm and finished in gloss acrylic lacquer.
-
Burr clock
Another clock this time made from a piece of unknown burr. It is on a Bubinga stand and is about 25cm by 25cm and finished in satin acrylic lacquer.
